Rozdíly

Zde můžete vidět rozdíly mezi vybranou verzí a aktuální verzí dané stránky.

--- private:poznamky:linux:ups [2019/11/08 17:20] – snemec
+++ private:poznamky:linux:ups [2024/04/13 19:56] (aktuální) – [Instalace] snemec
@@ Řádek 1: / Řádek 1: @@
+====== Konfigurace APC UPS - apcupsd  ======
+Pro UPS od APC\\
+http://www.apcupsd.org/manual/manual.html\\
+https://www.pontikis.net/blog/apc-ups-master-slave-setup-apcupsd\\
+http://www.cyberciti.biz/faq/debian-ubuntu-centos-rhel-install-apcups\\
+http://wiki.hkfree.org/Jak_zprovoznit_UPS_na_Linuxu\\
+http://www.abclinuxu.cz/clanky/hardware/jak-na-ups\\
+https://www.brunweb.de/configuration-of-an-apc-ups-under-proxmox/\\
+==== Instalace ====
+<code>
+apt install apcupsd
+</code>
+Místo vypnutí je provedena hibernace\\
+https://wiki.archlinux.org/index.php/APC_UPS\\
+Konfigurace pro jednotlivé stavy UPS\\
+Odesílání emailů, shutdown ...\\
+  /etc/apcupsd/apccontrol
+Základní konfigurace\\
+  /etc/apcupsd/apcupsd.conf
+<code>
+## apcupsd.conf v1.1 ##
+UPSNAME PRX01
+UPSCABLE usb
+UPSTYPE usb
+LOCKFILE /var/lock
+SCRIPTDIR /etc/apcupsd
+PWRFAILDIR /etc/apcupsd
+NOLOGINDIR /etc
+ONBATTERYDELAY 6
+BATTERYLEVEL 5
+MINUTES 3
+TIMEOUT 0
+ANNOY 300
+ANNOYDELAY 60
+NOLOGON disable
+KILLDELAY 0
+NETSERVER on
+NISIP 127.0.0.1
+NISPORT 3551
+EVENTSFILE /var/log/apcupsd.events
+EVENTSFILEMAX 10
+UPSCLASS standalone
+UPSMODE disable
+STATTIME 0
+STATFILE /var/log/apcupsd.status
+LOGSTATS off
+DATATIME 0
+</code>
+  Nastavení času vypnutí před vybitím UPS baterií
+  Paramentr MINUTES 3
+Vzorová konfigurace pro školu Veltrusy [[private:zakaznici:skolaveltrusy:ups|Konfigurace serverů připojených k UPS]]
+====== Konfigurace CyberPower UPS ======
+https://www.cyberpowersystems.com/product/software/power-panel-personal/powerpanel-for-linux/
+==== Instalace ====
+<code>
+wget --no-check-certificate https://dl4jz3rbrsfum.cloudfront.net/software/PPL-1.3.3-64bit.deb
+</code>
+  dpkg -i powerpanel_ver_amd64.deb
+  dpkg -i powerpanel_132_amd64.deb
+<code>
+pwrstat -lowbatt -runtime 300 -active off -cmd /etc/pwrstatd-powerfail.sh -duration 10 -shutdown off
+pwrstat -pwrfail -delay 300 -active off -cmd /etc/pwrstatd-powerfail.sh -duration 10 -shutdown on
+root@PC-MATE:/etc# pwrstat -config
+Daemon Configuration:
+Alarm .............................................. On
+Hibernate .......................................... Off
+Action for Power Failure:
+        Delay time since Power failure ............. 300 sec.
+        Run script command ......................... Off
+        Path of script command ..................... /etc/pwrstatd-powerfail.sh
+        Duration of command running ................ 10 sec.
+        Enable shutdown system ..................... On
+Action for Battery Low:
+        Remaining runtime threshold ................ 300 sec.
+        Battery capacity threshold ................. 35 %.
+        Run script command ......................... Off
+        Path of command ............................ /etc/pwrstatd-powerfail.sh
+        Duration of command running ................ 30 sec.
+        Enable shutdown system ..................... Off
+</code>